fuseholder blocks & clips omh 25 www.schurter.com/pg02 b fuses fuseholder open design, holder for omf 63, omf 125 and omt 125, smd 125 vac 5 a (ul/csa) description - suitable for smd fuse-links omf 63/omf 125/omt 125 standards - ul 512 and csa c22.2 no. 39 approvals - ul file number: e39328 references general product informatio n packaging detail s fuseholder to omf 12 5 ; omf 6 3 ; omt 12 5 weblinks approval s , roh s , china-roh s , e-stor e , distributor-stock-chec k , accessorie s , product change notification (pcn ) technical data fuse-link omx 63/125 fuse mounting pcb terminal solder smt rated voltage 125 vac rated current 5 a (ul/csa) degree of protection ip 00 admissible ambient air temp. -40 c to 85 c climatic category 40/085/21 acc. to iec 60068-1 material: socket thermoplastic, beige, ul 94v-0 material: terminals tin-plated copper alloy unit weight (socket/cap) 3.9 g storage conditions 0 c to 60 c, max. 70% r.h. product marking , approvals soldering methods reflow solderability 245 c / 3 sec acc. to iec 60068-2-20, test td resistance to soldering heat 260 c / 10 sec acc. to iec 60068-2-20, test td dielectric strength > 3 kv between l-n (50 hz; 1 min) impulse withstand voltage > 4 kv between l-n insulation resistance > 10 m between l-n (500 vdc; 1 min) overvoltage category i - iii acc. to iec 60664-1 pollution degree 1 - 3 acc. to iec 60664-1 abmessungen 12 mm ? 6 12 1.2 5.2 4.3 5 3 6 soldering?pads packaging unit .xx = .11 plastic bag (100 pcs.) .xx = .22 blister tape 33 cm reel (750 pcs.) .xx = .23 blister tape 33 cm reel (1500 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|